Alibaba Store
Tmall Store
Jingdong Sstore
1. Power supply: Ultra pure water machines usually require a stable power supply to ensure the normal operation of the equipment. Ensure that the power supply meets the requirements of the equipment based on its power and voltage requirements.
2. Water source: The water source for ultrapure water machines can usually be tap water or pre treated water. Tap water is a common water source choice, but it is necessary to consider the water quality and impurities contained in tap water. Pre treated water can be treated using pre-treatment equipment such as reverse osmosis devices to reduce the solute and impurity content in the water.
3. Temperature: The operating temperature of ultrapure water machines is generally within the range of room temperature, usually 5-40 degrees Celsius. Ensure that the equipment operates at an appropriate temperature to avoid any impact on its performance caused by excessively low or high temperatures.
4. Pressure: Ultra pure water machines typically require a certain amount of water pressure to push water through different treatment modules and filters. Ensure that the water pressure supplied by the water source meets the equipment requirements to ensure the normal operation and treatment effect of the water flow.
5. Maintenance: The operating conditions of the ultrapure water machine also include regular maintenance. According to the requirements of the equipment, regularly replace the filter element, clean the interior of the equipment, and check the operating status of the equipment. Follow the user manual and maintenance guidelines of the equipment to ensure its long-term stable operation.
6. Water quality testing: Regularly test the water quality of ultrapure water, using water quality analysis instruments or commissioning professional laboratories for testing. Monitor key parameters such as conductivity, dissolved oxygen, total organic carbon (TOC), microbial indicators, etc. to ensure that ultrapure water meets the required purity standards.
7. Filter replacement: Regularly replace the filter element and processing module according to the requirements and service life of the equipment to ensure the effective filtration and impurity removal ability of the filter element. The replacement cycle and method of the filter element should follow the equipment's user manual and the supplier's recommendations.
8. Equipment cleaning: Regularly clean the internal components and pipelines of the ultrapure water machine to prevent the growth of dirt and bacteria. Use appropriate cleaning agents and tools, and follow the equipment's cleaning instructions for operation.
9. Environmental conditions: The ultrapure water machine should be installed in a dry, well ventilated environment, avoiding direct sunlight and high temperature environments. Also, avoid contact with dust, chemicals, and other substances that may contaminate equipment and water quality.
10. Operation precautions: When operating the ultrapure water machine, pay attention to the correct operation steps to avoid equipment failure or water pollution caused by operational errors. It is strictly prohibited to connect non ultrapure water to equipment or use ultrapure water machines to treat unsuitable solutions.
Correctly setting operating conditions, regular maintenance, water quality testing, and following operating procedures are all key factors in ensuring the normal operation and high purity water quality of ultrapure water machines. Regularly train operators to familiarize themselves with the key points of equipment use and maintenance, enabling them to effectively operate and manage ultrapure water machines to obtain stable high-purity water quality.
