Alibaba Store
Tmall Store
Jingdong Sstore
Product parameters:
Model: YTGT-12N LCD
Temperature range: RT+5~150 ° C
Time setting: 1min-100h
Temperature stability @ 40 ° C: ± 0.3 ° C
Display accuracy: 0.1 ℃
Heating time: ≤ 15min
Nitrogen pressure: ≤ 0.1MPa
Nitrogen flow rate: 0-10L/min
Air needle length: 150mm
Sample processing capacity: 1 standard module
Size (mm): 300 L x 200 W x 540 H
Net weight: 6.5kg
Power supply/power: AC220V 50Hz; 200W
Standard module: 12 holes * 16.5mm
Programming function: 5 groups
Air cooling function: Yes
- Product Details
- Product manual
Model: YTGT-12N LCD
Product Overview:
It not only solves all the disadvantages of rotary evaporators, especially for small quantities of multiple samples, but also becomes a necessary instrument for every chemical laboratory. For samples that cannot be heated or even require cooling and concentration, only a nitrogen blowing instrument can be used for concentration. At the same time, the sample can be heated by temperature control. Inert gases such as nitrogen can be quickly, controllably, and continuously blown to the surface of the sample to achieve rapid and anaerobic concentration of the sample solution. This method is time-saving, convenient, and accurate. Widely used in food safety, medicine, pesticide residue detection, clinical pharmacokinetics and other fields.
Product features of Ye Tuo YTGT-12N liquid crystal dry nitrogen blowing instrument:
Quickly, continuously, and controllably blow nitrogen gas onto the surface of the heated sample. Based on the evaporation rate and boiling point of the concentrated solvent, set the heating temperature to achieve rapid concentration of a large number of samples.
This instrument adopts an aluminum plate heating module, which has good heat transfer and uniform heat transfer, which is conducive to rapid heating and temperature control. Blow nitrogen gas onto the surface of the sample to achieve anaerobic concentration of liquid to the sample.
It will not cause cross contamination, and the various gas needle channels on the gas distribution component can be used in combination or separately.
The system has high temperature control accuracy, wide temperature control range, temperature CNC digital display, and convenient temperature calibration.
The adjustable bracket is made of alloy material, which is easy and fast to operate.
● Nitrogen independent valve, with independent control for each blowing, saving temperature and gas.
Metal module, made of alloy aluminum material, resistant to oxidation and corrosion.
Quick connector, copper quick connector, easy to use.
